TestBlink Example

// Test blink with Pinguino
// jean-pierre MANDON 2008
 
int led1;                  // led1 is an integer ( Pin )
int led2;                  // led2 is an integer ( Pin )
int tempo;                 // tempo is an integer
 
void setup()
{
        led1=1;                       // led 1 is connected on pin 1
        led2=7;                       // led 2 is connected on pin 7
        tempo=500;                    // tempo for blink is 500 mS
        pinMode(led1,OUTPUT);         // pin 1 is an output
        pinMode(led2,OUTPUT);         // pin 7 is an output
}
 
void loop()
{
 
        while (1)
        {
                digitalWrite(led1,HIGH);        // led 1 high
                digitalWrite(led2,LOW);         // led 2 low
                delay(tempo);                   // wait 0,5 second
                digitalWrite(led1,LOW);         // led 1 low
                digitalWrite(led2,HIGH);        // led 2 high
                delay(tempo);                   // wait 0,5 second
        }
}